gu photomos (aqw21 ? ) types 1. ac/dc type *indicate the peak ac and dc values. note: for space reasons, the smd terminal shape indicator a and the package type indicator x and z are omitted from the seal. rating 1. ac/dc type 1. absolute maximum ratings (ambient temperature: 25 c 77 f ) compact dip (2 form a) 8-pin type. controls load voltage 60v to 600v. gu photomos (aqw21 ? ) output rating* part no. pac king quantity through hole terminal surface-mount terminal load voltage load current tube packing style tape and reel packing style tube tape and reel 60v 500 ma aqw212 aqw212a aqw212ax aqw212az 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs. 100 v 300 ma aqw215 aqw215a aqw215ax aqw215az 200 v 160 ma aqw217 aqw217a aqw217ax aqw217az 350 v 120 ma aqw210 aqw210a aqw210ax aqw210az 400 v 100 ma aqw214 aqw214a aqw214ax aqw214az 600 v 40 ma AQW216 AQW216a AQW216ax AQW216az item symbol aqw212(a) aqw215(a) aqw217(a) aqw210(a) aqw214(a) AQW216(a) remarks input led forward current i f 50 ma led reverse voltage v r 5 v peak forward current i fp 1 a f = 100 hz, duty factor = 0.1% pow er dissipation p in 75 mw output load voltage (peak ac) v l 60 v 100 v 200 v 350 v 400 v 600 v continuous load current i l 0.50 a (0.60a) 0.30 a (0.35 a) 0.16 a (0.2 a) 0.12 a (0.14 a) 0.10 a (0.13 a) 0.04 a (0.05 a) ( ): in case of using only 1 channel a connection: peak ac, dc peak load current i peak 1.0 a 0.9 a 0.48 a 0.36 a 0.3 a 0.12 a a connection: 100 ms (1 shot), v l = dc pow er dissipation p out 800 mw total power dissipation p t 850 mw i/o isolation voltage v iso 1,500 v ac between input and output/ between contact sets temperature limits operating t opr C40 c to +85 c C40 f to +185 f non-condensing at low temperatures storage t stg C40 c to +100 c C40 f to +212 f mm inch 6.4 .252 9.78 .385 3.9 .154 9.78 .385 6.4 .252 3.6 .142 1 2 3 4 8 7 6 5 features 1. compact 8-pin dip size the device comes in a compact (w) 6.4 (l) 9.78 (h) 3.9 mm (w) .252 (l) .385 (h) .154 inch, 8-pin dip size (through hole terminal type). 2. applicable for 2 form a use as well as two independent 1 form a use 3. controls low-level analog signals photomos relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. high sensitivity, high speed response can control a maximum 0.13 a load current with a 5 ma input current. fast operation speed of 310 s (typical). (aqw214) 5. low-level off state leakage current the ssr has an off state leakage current of several milliamperes whereas the photomos relays has typ. 100 pa even with the rated load voltage of 400 v (aqw214). 6. low-level thermal electromotive for ce (approx. 1 v) 7. eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 8. stable on resistance. 9. eliminates the need for a power supply to drive the power mosfet typical applications ? high-speed inspection machines ? telephones equipment ? computer all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd.
gu photomos (aqw21 ? ) 2. electrical characteristics (ambient temperature: 25 c 77 f ) note: recommendable led forward current i f = 5ma. *turn on/turn off time reference data item symbol aqw212(a) aqw215(a) aqw217(a) aqw210(a) aqw214(a) AQW216(a) condition input led operate current typical i fon 0.9 ma i l = max. maximum 3 ma led turn off current minimum i foff 0.4 ma i l = max. typical 0.8 ma led dropout voltage typical v f 1.25 v (1.14 v at i f = 5 ma) i f = 50 ma maximum 1.5 v output on resistance typical r on 0.83 ? 2.3 ? 11 ? 23 ? 30 ? 70 ? i f = 5 ma i l = max. within 1 son time maximum 2.5 ? 4.0 ? 15 ? 35 ? 50 ? 120 ? off state leakage current maximum i leak 1 a i f = 0 ma v l = max. tr ansfer characteristics tu rn on time* typical t on 0.65 ms 0.60 ms 0.25 ms 0.25 ms 0.31 ms 0.28 ms i f = 5 ma i l = max. maximum 2 ms 2 ms 1.0 ms 0.5 ms 0.5 ms 0.5 ms tu rn off time* typical t off 0.08 ms 0.06 ms 0.05 ms 0.05 ms 0.05 ms 0.04 ms i f = 5 ma i l = max. maximum 0.2 ms i/o capacitance typical c iso 0.8 pf f = 1 mhz v b = 0 v maximum 1.5 pf initial i/c isolation resistance minimum r iso 1,000 m ? 500 v dc ton input output 10% 90% toff 1. load current vs. ambient temperature characteristics allowable ambient temperature: C40 c to +85 c C40 f to +185 f 2.-(1) on resistance vs. ambient temperature characteristics measured portion: between terminals 5 and 6, 7 and 8; led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 2.-(2) on resistance vs. ambient temperature characteristics measured portion: between terminals 5 and 6, 7 and 8; led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) load current, ma 0 200 300 600 500 400 0204060 80 85 100C40 C20 100 ambient temperature, c aqw212 aqw215 aqw217 aqw210 AQW216 aqw214 0 1 2 3 4 C40 5 0 C20 20 40 60 8085 aqw212 aqw215 on resistance, ? ambient temperature, c 0 20 40 60 80 C40 120 0 C20 20 40 60 8085 AQW216 100 aqw210 aqw217 aqw214 on resistance, ? ambient temperature, c all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd.
gu photomos (aqw21 ? ) 3. turn on time vs. ambient temperature characteristics led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 4. turn off time vs. ambient temperature characteristics led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 5. led operate current vs. ambient temperature characteristics sample: all types; load voltage: max. (dc); continuous load current: max. (dc) 0 1.0 1.5 C40 2.0 0 C20 20 40 60 8085 0.5 aqw212,aqw215 AQW216,aqw210,aqw217 aqw214 turn on time, ms ambient temperature, c 0 0.1 0.2 0.3 0.4 C40 0 C20 20 40 60 8085 aqw212,215 aqw214 AQW216,210,217 turn off time, ms ambient temperature, c 0 1 2 3 4 C40 5 0 C20 20 40 60 8085 led operate ourrent, ma ambient temperature, c 6. led turn off current vs. ambient temperature characteristics sample: all types; load voltage: max. (dc); continuous load current: max. (dc) 7. led dropout voltage vs. ambient temperature characteristics sample: all types; led current: 5 to 50 ma 8.-(1) current vs. voltage characteristics of output at mos portion measured portion: between terminals 5 and 6, 7 and 8; ambient temperature: 25 c 77 f 0 1 2 3 4 C40 5 0 C20 20 40 60 8085 led turn off current, ma ambient temperature, c 0 1.0 1.1 1.2 1.3 C40 0 C20 20 40 60 8085 1.4 5ma 1.5 led dropout voltage, v ambient temperature, c 50ma 30ma 20ma 10ma 1.00.60.20 C1.0 C0.6 C0.2 C0.5 C0.4 C0.1 0.5 0.4 0.1 0.2 0.3 C0.2 C0.3 C0.4C0.8 0.4 0.8 aqw212 aqw215 current, a voltage, v 8.-(2) current vs. voltage characteristics of output at mos portion measured portion: between terminals 5 and 6, 7 and 8; ambient temperature: 25 c 77 f 9. off state leakage current vs. load voltage characteristics measured portion: between terminals 5 and 6, 7 and 8; ambient temperature: 25 c 77 f 10. turn on time vs. led forward current characteristics measured portion: between terminals 5 and 6, 7 and 8; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 531 C5 C3 C1 C200 C160 C40 200 160 40 80 120 C80 C120 C2C4 24 aqw217 AQW216 aqw214 current, ma voltage, v aqw210 0 60 100 10 C3 10 C6 10 C9 10 C12 20 40 80 AQW216 aqw214 off state leakage current, a load voltage, v 0 0.2 0.4 0.6 0.8 1.2 1.0 10 20 30 40 50 aqw210,AQW216,aqw217 aqw212,aqw215 aqw214 turn on time, ms led forward current, ma 11. turn off time vs. led forward current characteristics measured portion: between terminals 5 and 6, 7 and 8; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 12. output capacitance vs. applied voltage characteristics measured portion: between terminals 5 and 6, 7 and 8; frequency: 1 mhz; ambient temperature: 25 c 77 f 0 0.02 0.04 0.08 0.06 10 0203040 0.12 50 0.10 aqw212 aqw215 AQW216 aqw210,217 aqw214 turn off time, ms led forward current, ma 0 50 100 200 10 20 30 40 50 150 0 aqw212 aqw215 aqw217 aqw214 AQW216,aqw210 output capacitance, pf applied voltage, v all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd.
|
